Lifetime Homes: the 16 steps
Lifetime Homes, as a concept, has been around since 1991. The idea is to make housing usable by people of all abilities and in all phases of life, including childhood. It’s not just about the disabled!
It was developed by a group of housing experts, drawn together by the Joseph Rowntree Foundation. A few of the ideas were incorporated into Part M of the England & Wales Building Regulations in 1999, but the Lifetime Homes concept as a whole is still only widely used by Housing Associations. The Code for Sustainable Homes awards eco points for building to Lifetime Homes standard and, as it stands, the standard will have to be incorporated into all new homes by 2016. You won’t be able to score the 90% rating required to meet Level 6 of the Code without it.
There are 16 design features which combined make up the Lifetime Homes standard:
• Car parking space should be easily capable of enlargement to attain a width of 3300mm
• The distance from the car parking space to the home should be kept to a minimum and should be level or gently sloping
• The approach to all entrances should be level or gently sloping
• All entrances should be illuminated
• Communal stairs should provide easy access and where levels are reached by lift, the lift should be fully wheelchair accessible
• Doorways and hallways have to be at least 750mm wide, or at least 900mm wide when the approach is head-on
• Dining and living areas should have space for turning a wheelchair and there should be adequate circulation space for wheelchair users
• The living space should be at the level of the entrance
• If homes of two or more storeys, there should be space at entrance level which should be used as a convenient bed space
• The design of the property should incorporate a provision for a future stair lift and a suitably identified space for a through-the-floor lift from the ground to the first floor
• The design of the property should provide for a reasonable route for a potential hoist from a main bedroom to the bathroom
• There should be a WC situated at the entrance level of the property and a drainage provision enabling a shower to be fitted in the future
• Walls in the bathrooms and toilets should be capable of taking adaptations such as handrails
• The bathroom should be designed to incorporate ease of access to essential amenities such as the bath, basin and WC
• Living room windows should begin 800mm from the floor or lower and be easy to open
• Switches, sockets, ventilation and service controls should be situated between 450mm and 1200mm from the floor
Comment
Most of these features can be incorporated into most house designs fairly easily and with minimal additional cost. The ones that are likely to cause problems for designers are:
• The requirement for larger bathrooms, especially the future proofing of the downstairs loo as a potential wet room. In small houses, this is a considerable space eater
• Future-proofing a lift shaft: again this is tricky in small houses
• Wide parking spaces
Ideally, from a Lifetime Homes point of view, we would all be living in generous bungalows. However, this runs completely counter to the prevailing mood in planning which demands that we squeeze as much as possible living space into the available footprint. Indeed, another part of the Code for Sustainable Homes awards points for using the basement and/or the loftspace. It’s not difficult to build a four-storey house that conforms to Lifetime Homes standard, but arguably it goes against the spirit of what Lifetime Homes is all about, which is making the whole house accessible to the physically impaired. Box ticking 1 Common sense 0.
Labels: housing development


3 Comments:
I hope Lifetime Homes isn't just about box ticking nor is it a desire to see everyone living in spacious bungalows.
it is about trying to design new housing that meets the needs of a wide range of potential users; in particular, ageing.
My favourite statistic on ageing is that for a girl born in 2000, they will have a 50:50 chance of living to 100 years old. So we're not just talking about the needs of current occupiers but their changing needs and the needs of their families and friends.
I'm pleased that you accept that adopting Lifetime Homes is relatively simple but would disagree with your view that it runs counter to issues of development density.
In many ways Lifetime Homes standards are easiest to incorporate within high density flatted developments. Lifetime Homes is already a planning requirement in large scale developments in London and is incorporated within the strategic planning framework.
Lifetime Homes attempts to establish some straightforward standards that if incorporated within the building design process from the beginning should be low cost and unobtrusive. The benefits are far longer term in providing homes and environments that meets the needs of a wider range of occupiers and visitors.
Please, please, please consider the problems that disabled facilites at low levels cause for very tall people (and the population is getting taller). Back problems are exacerbated by reaching down to low sinks, kitchen worktops or even light switches and door handles. Don't discriminate against the tall minority!
Big John
Absolutely, inclusive design means designing for the widest range of potential users, big, tall, small. The Lifetime Homes criteria don't specify work surface height. They do specify the height of controls and electric sockets. I would of thought this would benefit a wide range of people as it avoids scrabbling around plugging in things at ground level.
Post a Comment
<< Home